Flotation Cells (Froth Flotation) were developed to separate and recover high value Sulphide ores from low grade ore bodies. The ore is crushed and milled at the concentrator in a process known as comminution, where the mineral is in suspension in slurry. The particle size for mineral being recovered is generally less than <0.1mm. This slurry (pulp) is dosed with a collector (Surfactant chemical) where necessary and then pumped into the Flotation Cell. The Flotation Cell is aerated to produce bubbles and agitated to keep the solids particles in suspension in the pulp. The hydrophobic particles (mineral particles being recovered) attach to the bubbles and rise to the surface where they form a blanket of froth which contains the mineral in concentrate. The Froth concentrate overflows the launders in the Flotation Cell and is then pumped to the Concentrate Thickener. The residue solids left in suspension in the Flotation Cell slurry are referred to as Tailings and either flow into further stages of Flotation to increase residence time, thereby maximizing recovery of the mineral, or are pumped to the Tailings Dam.
How do the FloLevel products improve the flotation cell process?
The FloLevel Array provides the first level measuring technology that can survive the environmental conditions of the Flotation Cell, because of its unique rarefaction self-cleaning capability. By providing Real Time Process Control, greater automation is now possible for optimizing the Flotation Cell area. The Acoustic transducers are not affected by the density changes and conductivity changes to the Pulp/Slurry providing repeatable accurate readings. The FloLevel system also provides additional process feedback on Froth Height, Froth Density (contained mineral) and Froth Flow Rate to improve each Flotation Cells efficiency. No moving parts mean less maintenance and less downtime.
The FloLevel Array provides the first level measuring technology that can survive the environmental conditions of the Flotation Cell, because of its unique rarefaction self-cleaning capability. By providing Real Time Process Control, greater automation is now possible for optimizing the Flotation Cell area. The Acoustic transducers are not affected by the density changes and conductivity changes to the Pulp/Slurry providing repeatable accurate readings. The FloLevel system also provides additional process feedback on Froth Height, Froth Density (contained mineral) and Froth Flow Rate to improve each Flotation Cells efficiency. No moving parts mean less maintenance and less downtime.
How accurate is the FloLevel analyzer?
The FloLevel system can provide an accuracy of +-2mm or better with a similar small 2mm resolution capability. However, the surface modulation (surface agitation) of each Flotation Cell can vary from small millimetre change increments to much greater surface modulation depending on the process conditions of the Flotation Cell at the time. Another advantage of the Acoustic Array system is that you have no moving parts and even under high agitation the Array system will remain stable and provide an averaging affect for the Pulp/Slurry level interface. This will ensure the control system to stay stable under all operating conditions.
The FloLevel system can provide an accuracy of +-2mm or better with a similar small 2mm resolution capability. However, the surface modulation (surface agitation) of each Flotation Cell can vary from small millimetre change increments to much greater surface modulation depending on the process conditions of the Flotation Cell at the time. Another advantage of the Acoustic Array system is that you have no moving parts and even under high agitation the Array system will remain stable and provide an averaging affect for the Pulp/Slurry level interface. This will ensure the control system to stay stable under all operating conditions.
How much can be saved - ROI (Return On Investment) The FloLevel system, because of its repeatable level accuracy measuring Pulp/Slurry height and Froth height, as well as having the capability to measure Froth Density and Froth Flow Rate, will increase the mineral recovery efficiency of each Flotation Cell by providing instantaneous feedback on ore characteristic changes which affect the mineral recovery. This will also decrease the amount of time and cost required for routine sampling and laboratory testing. ROI (return on investment) for the purchase price of the FloLevel system, plus installation is measured in weeks because of its ability to provide reliable process feedback, for a minerals process application that has been around for over 100 years, but has lacked the technology to allow stable feedback on process changes in the Flotation Cell, caused by different ore body characteristics. The FloLevel system utilized with a DCS or PLC control system will now allow for a greater automation capability and be less reliant on operators manually observing each Cell for changes in mineral recovery. Individual Flotation Cells can now be tuned to produce for the optimal mineral recovery and profit return whatever the ore body grade being processed.
No comments:
Post a Comment